Autel IM608 Program Key Fob for 2014 Chevy Silverado

What is going on, guys? Now I’m gonna program a new ignition key fob for 2014 Chevrolet Silverado with Autel MaxiIM IM608 key programmer.

As you can see, this is the new key to be programmed.

Connect Autel IM608 scan tool to OBD2 port of the car, turn on ignition, then let’s get to start:

Press “IMMO”>>“VIN” on the upside bar >> Auto detect >> Accept >> OK (if VIN number was blank, press “Read” to acquire) >> Yes

5.3L(L83) >> Transfer case, two speed, switch activated (NQH) >> Hot functions

Auto control dual zone (CJ2) >> Base >> Immo & Keys

Add/replace key fobs >> Key fob 1 >> Read the notes carefully, press “Continue”

Press “Learn” to start, hold and press LOCK & UNLOCK buttons together on the key until we hear the beep.
Status “Uncommanded” changed to “learn” on AutelIM608 scanner. That means the key has been learned successful.

Let me check if the key was programmed… The lock & unlock buttons are workable, and the remote start works. Okay, it is already programmed.

This is how to use Autel MaxiIM IM608 to program key fob for a 2014 Chevrolet Silverado. It is quite easy and fast to be done in 3 minutes.

Good luck!

Be the first to comment

Leave a Reply

Your email address will not be published.