XTOOL X100 Pad2 supports to program a new key for the 2020 Honda Brio success. Following I’ll show the operation procedure step by step.
Connect X100 Pad2 with OBD2 port, press
HONDA >> Agree >> Immobiliser >> Auto >> 16PIN
Please turn the ignition switch to on.
OK >> Key >> Add a key
Follow the notes to operate:
Turn off the ignition switch.
Turn on the ignition switch with the original key.
Turn off the ignition switch within 16s.
Turn on the ignition switch with a new key within the 20s.
Turn off the ignition switch within 17s.
Turn on the ignition switch without changing the key within the 20s.
Turn off the ignition switch.
Turn on the ignition switch.
Immobiliser device indicator is off? Yes
Turn off the ignition switch.
Turn on the ignition switch with the original key.
Key registration has been completed.
Turn off the ignition switch.
Check all keys in order to ensure everyone can start the engine.
Turn on the ignition switch.
Go to test the keys, both can start the engine, and the remote is OK.
Key programming has done!
This is the 2020 Honda Brio adding key via Xtool X100 Pad2 Key Programmer successfully.
Leave a Reply