If you have lost all the keys to your 2018 Toyota RAV4 with keyed ignition, follow these steps to program a new key with Autel IM608 II. This process is applicable for vehicles in the Middle East and USA.
Steps to Program a New Key
- Setup the Autel IM608 II
- Connect the Autel IM608 II to the vehicle’s OBD-II port.
- Navigate to the IMMO function on the device.
- Agree to the Terms and Conditions.
- Vehicle Selection
- Select Toyota from the list of manufacturers.
- Choose Automatic selection to read the vehicle information.
- Confirm the vehicle information and click OK.
- Access the Control Unit
- Select the Control unit option.
- Choose Immobilizer (H 8A/8E).
- Immobilizer Reset (All Keys Lost)
- Select Immobilizer reset (all keys lost).
- Ensure the vehicle’s door remains open during the learning process.
- Key Registration
- The device will prompt you to enter the number of keys you want to register. Enter 1.
- Follow the instructions on the screen:
- Turn the ignition off.
- Turn the ignition on.
- Turn the ignition off and remove the key.
- Turn the ignition on.
- Turn the ignition off and remove the key.
- Master Key Learning
- The Autel IM608 Pro2 will prompt you to learn 1 master key within 120 seconds.
- Insert the master key and turn the ignition on. Wait for 5 seconds.
- Quickly turn the ignition on and off 5 times until the SECURITY lamp goes out, indicating that the learning process is complete.
- Final Steps
- Verify the number of master keys programmed (should be 1).
- Test the new key to ensure it works properly.
- Completion
- The process is now complete, and the new key should be successfully programmed.
Notes
- Ensure the door remains open during the learning process.
- Follow all prompts and instructions on the Autel IM608 II carefully to avoid any errors.
By following these steps, you can program a new key for your 2018 Toyota RAV4 using the Autel IM608 II.
Leave a Reply