Autel MaxiIM IM508 Key Programmer (In 2022 we recommend Autel IM508 + XP400 Pro) is able to program 2020-2022 Hyundai i10 ID4A all keys lost by OBD with free pin code. Follow the steps below to learn how to do.
Connect Autel IM508 to OBD,
IMMO >> Hyundai >> Manual selection >> Europe >> I10(AC3) >> 2020- >> Smart key >> Yes >> Immo status scan >> Read PIN >> Read pin code(4A smart card)
This function only supports models with 4A chip type smart card. Please ensure the key type is correct!
Press the START button, turn the Hazard warning light on.
Password was read out: 439476.
All keys lost(guided) >> Start
This function supports add key and all key lost;
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally. Press “Yes” to continue.
Turn the ignition off
(note: the instrument screen is black)
Open and then close the driver door once!
Please enter the 6-digit security code: 439476
Click “OK” to complete the following steps:
Within 5s after “OK” is pressed. Use the back or top of the Universal Smart Key to hold down the START button for 5s until the anti-theft lamps flash.
(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully.)
Programming succeeded.
Number of current keys: 1
This is how to program 2022 Hyundai i10 ID4A all keys lost with Autel IM508.
More information about Autel Scanner, Please visit https://www.obdii.shop
Leave a Reply