Autel MaxiIM IM608 PRO + XP400 Pro can program Audi Q5(2009-2012) via OBD success. XP400 Pro can also work with Autel MaxiIM IM508/ IM608 to realize equal immo functions as IM608 Pro.
1. Identify Car Model
To make a dealer key, connect Autel IM608 Pro, J2534 JVCI, XP400 Pro & OBD2 port. Insert the key, press
Immo >> Accept >> Audi >> Smart selection >> Input VIN >> Yes
1. Hitag Vag key; #31 key blank.
2. No need to learn remote controls separately.
3. “Key learning” function will first clear all working keys, then learn keys available. “Remote Control Learning” function will first clear all working remotes, then learn remotes available.
Before using these functions, please ensure that all keys are prepared.
It shows the current key status information, press “ESC”.
2. Key Learning
Press “Key learning”.
Waiting reading IMMO data…
Please de-energize the BCM2.
Please power on the BCM2 again.
Read completed.
Do you need to make a dealer key? Yes
Put a blank key into the XP400 Pro Programmer keyhole.
Waiting for processing until 100%…
Make dealer key success!
If you want to generate the next one, press “Yes”, otherwise press “No”.
Input the number of keys to be learned.
Note: if the vehicle only has transponders, put in sequence the keys that need to be learned in the transponders and turn off and then on the Start/Stop button!
Key learning success!
As you can see, all the key status information were changed.
Now let’s go ahead and check the new key, okay, it can work normally.
Using Autel IM608 Pro to program Audi Q5(2009-2012) all key lost is successful!
Leave a Reply