OBDSTAR DP Plus is tested working flawlessly to program smart remote Nissan Teana 2014 (L33) via OBD.
Here Nissan Teana 2.0 XL (L33) year 2014
ID: 47 (Hitag3) frequency: 433Mhz read by VVDI key tool
Smart key system with 20digits pincode.
Program using OBDSTAR DP plus.
Tap “Immobilizer” – “Nissan” – “Nissan /Infiniti V31.56”.
Connecting for several seconds……
20 digital Pincode -Smart key system- Select from vehicle.
13 – Teana – Program smart keys.
Close the ignition switch, open the emergency switch.
All keys will be erased, press Yes to continue.
Steering lock released.
Don’t press brake pedal.
Register all smart keys.
Put to start / stop button and turn on.
Put 1st smart key on Start /Stop and turn on.
Security light (Red) blink 5 times to confirm 1st key programmed.
Turn off.
Put the 2nd smart key on Start /Stop and turn on.
Security light (Red) blink 5 times to confirm 2nd key programmed.
Turn off.
Put 1st remote on Start / Stop button, press brake then Start car.
Engine can start, wait for 10 seconds then turn off.
Steering lock locked.
Key registration complete.
Test remote if it works.
Leave a Reply