How to increase speed for Mercedes Benz C240 with MS908SP ?
Lets follow the steps as bellow :
1.Connect MS908SP and J2534 with Benz C240.
Go to “MaxiSys-> Diagnostics-> Benz-> vehicle detect”.
Gateway data initializing…
2.Get the VIN number. Tap OK to go on.
Select the date of manufacture vehicle. This case is up to 2003.
Press the button left to select left-hand steering.
System data initializing…
Communication is established…
3.Go to Programming/Coding.
4.Go to ME2-SFI-Motor electronics 2.
Establishing communication…
5.Go to Variant coding.Go to Display of coding data.Go to Coding.
System data initializing…
Scroll to 2031 about speed limit. Put on the bar.
6.Tap F2 Edit.
Set 250 km/h, and tap OK.
7.Tap F3 send.
Tap OK to make sure that the coding is transferred to the control unit.
The coding has been carried out.
Turn off the key and then turn the car back on. Then you can go for a drive.
8.Go to instrument cluster.
Establishing communication…
9.Go to Active Test.
10.Go to Actuation of the instrument pointer up to the maximum position. And you will see
Finished
More interesting for autel maxisys ms908p , welcome to check on https://www.obdii.shop
Leave a Reply