![Install-ISTA-Voltage-Control-tool-Step-by-step-2](https://blog.obdii.shop/wp-content/uploads/2022/09/Install-ISTA-Voltage-Control-tool-Step-by-step-2-640x381.jpg)
Install ISTA v4.01.22 Voltage Control tool Step by step
1.E-sys 3.29.0 software
1.1 Easy step to install BMW ENET
Latest BMW E-SYS 3.29.0 F-series coding software released here!
Here you can download BMW ESYS 3.29.0 + ESYS Launcher Premium 2.7.1 + Psdzdata V3.61.5 Lite for BMW coding!
Compatible with BMW ENET Cable and ICOM.
Note before you download:
ALL links here are free to all, NO pass!
And also try on your own risk!
1.2 E-SYS 3.29.0 setup file Download:
https://mega.nz/#!dERyUYCY!tW40F79km2jtLyEcR4e-RIB2Z6t0L2G7zOjlsAd5DcE
1.3 Psdzdata V3.61.5 Lite Download:
https://mega.nz/#!ehEjDLJb!gVbQZGfofR-BVzb_dn7sP1aYxqmtrSKNvmjUDa-kmKY
1.4 E-SYS Launcher Premium 2.7.1 Download:
https://mega.nz/#!F5oSUA5B!OYnxsT6ccYufG9us53ZpXhkJ5FJVys8WRnphvx6p9o0
Tips:
* You must uninstall the existing E-SYS version before installing new E-SYS 3.29.0.
* E-sys Launcher Premium 2.7.1 is tested OK to launch E-SYS 3.28.1, but for E-SYS 3.29.0, haven’t tested, should work.
* E-SYS Launcher Premium V2.7.1 require NET Framework 4.5.2 or above.
After download ESYS 3.29.0 Program, what tools you need for BMW Coding?
BMW ENET Cable : Cheapest option for BMW F-series Coding
BMW ICOM: Allow you to fully diagnose and program more than just do coding)
Recommended: BMW ICOM NEXT A+B+C or ICOM NEXT WIFI. (Next generation of ICOM A2)
1.5 Why choose E-Sys Launcher Premium to launch E-Sys software?
E-Sys Launcher Premium allows you to perform FDL coding.
– Increased default memory allocation.
– Enhanced overall System stability.
– Zero E-Sys Configuration.
– Personalized and individualized token.
– Easy-to-use.
Note: With E-Sys Launcher Premium, once “Car Series” is set, it can only be changed every 3 days, so be sure to set it correctly at first!
1.6 How to install BMW E-Sys 3.29.0?
(Steps refer to E-Sys 3.26.1 installation)
Extract E-Sys using Winrar. Right click it and click “extract here”.
Run E-Sys_Setup_3_26_1_b42487.exe
Select language, click “Next” then “I accept the agreement” then “Next”.
Click “Browse” to choose where to install E-Sys. The default location is C:\EC-Apps\ESG\E-Sys.
Set the data path for E-Sys, the default is C:\Data. Click next until the installation begins.
Click “Finish” to complete the basic installation procedure for E-sys.
Then you need to make it work.
You will see two folders, one is a “Patch” the other is “Token Generator”.
The patch folder contains 2 files
Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)
Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)
Use the Token Software, enter a username as you like and password.
2.Install ISTA v4.01.22 Voltage Control tool Step by step
Here is a DIY guide on setting up BMW ICOM ISTA+ BMW v4.01.22 Voltage Control tool. Simulates voltage of connected interface.
2.1 Free download Voltage Control tool:
Voltage Control tool for standalone ISTA 4.01.22
https://mega.nz/#!z14HBKLT!qB3Jtki7NHsIlYDWfxCnT4bcbTAymWF91A6H6DtR-wo
Voltage Control tool (+ HW mod) for standalone ISTA 4.01.22
https://mega.nz/#!vhomDCbb!dAMLrOgFDKgdoMMQAKWwPz-KSvNsVlZ4Vmt0VkLI6Hc
password: beemerboy88
2.2 Installation instructions:
Unblock archive and extract files to \testergui\bin\release.
Create desktop shortcut for the voltage tool.
2.3 How to use:
Start ISTA software first (if problems try running as admin).
Run voltage control tool.
Notes:Default voltage on startup is 14V.
Shutdown the control tool to restore real time voltage monitoring.
3.Update BMW ICOM Next firmware to V1.40.05 (guide)
Post topic: BMW ICOM Next fw: 1.4 1.40.05 bootimage 1.25.02 download and update instructions.
Free download BMW ICOM Next firmware 1.40.05:
https://mega.nz/!X14TxZYY!6zrJ6og9gR5u-CcGbGtWSpHBCknjhl-LElommEgYSK0
3.1 Compatible ICOM Next interface:
* BMW ICOM NEXT fw:1.4.0 V2017.03 Rheingold ISTA-D ISTA-P
* BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P
* Wifi BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P
Tip:To run ICOM Next A+B+Cnewest Rheingold ISTA-D 4.04.12 ISTA-P 3.60.2.001, ICOM Next firmware needs to be updated to the current SYSTEM IMAGE version: 01.25.02 and current APPLICATION IMAGE version: 1.40.05.
3.2 ICOM Next fw 1.40.05/01.25.02 update steps:
* Please use internet cable to connect ICOM Next with the computer, and charge ICOM Next via 12V power adapter or connect ICOM Next to BMW vehicle for power.
* Use IE Internet Explorer to open http://169.254.33.45:60080/, username/password: root/NZY1150263
* Select “Update Firmware”, you can see ICOM firmware version information.icom manager
* Select “Browse” to select file “ICOM-BootImage-01-25-02.bin”, set image type as “SYSTEM”, click “Send the file”.
* Select “Yes” when you get prompt “Write the image file to the flash?”, then ICOM indicator light will turn red.
* When it shows “The SYSTEM IMAGE update was successful”, click “Update Firmware”.
* Choose “ICOM-ApplicationImage-01-40-05.bin”, set image type “APPLICATION”, click “Send the file”, this will be done in several minutes please be patient.
* click “Yes” when you get prompt “Write the image file to the flash?”, then the ICOM indicator light will turn red again.
* Complete updating, click “reboot”.
* Click “Home” – “Update Firmware”, you will see ICOM Next firmware display the newest version.
Tip:
Make sure your computer obtain IP address automatically.
Done! GOOD LUCK!
4. How to Restore BMW ICOM Next in 12 steps
Here is the customer solution to BMW ICOM Next restore when you has red LEDs turn on issue when running firmware upgrade. In order to solve your incident, please apply the following steps:
Note: DO NOT UNPLUG the BMW ICOM Next emulator from the {OBD II} jack after an update via {ISTA}, a web interface or an emergency software update.
The {ICOM Next} starts with flashing green SYSTEM {LED}s. After about 10 seconds it shows red {LED}s for about 2 minutes. After this, the {ICOM Next} reboots due to a firmware update.
If the {ICOM Next} {LED}s remain red for more than 10 minutes, or if the {ICOM Next} is unplugged directly after an update, please carry out the following procedure:
4.1. Please ensure that ALL of the following prerequisites are satisfied:
1). You require a USB 2.0 or USB 3.0 flash drive. {USB 1.x flash drives are not supported).
2). The USB flash drive must be formatted with a FAT32 file system.
3). A minimum of 60 MByte free space is required on the USB flash drive.
4.2. Navigate to “C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-03-14-08”.
ProgramData folder is hidden by default. In that case, you have two options in order to access the file or the folder:
– change the settings directly in the Windows Explorer (“Tools => Folder Options => View => Show hidden files, folders or drives”)
– or enter the whole path into the Windows Explorer’s address bar and press enter.
4.3. Copy “{ICOM_Next-rootfs-010002.tar.gz}” to the root directory of the {USB} flash drive.
4.4. Copy “{ICOM_Next-app-010008.tar.gz}” to the root directory of the {USB} flash drive.
4.5. Disconnect the {ICOM Next} from the power supply.
4.6. Plug the {USB} flash drive into the {ICOM NEXT}.
4.7. Press and hold the button pressed on the {ICOM Next} and connect the {ICOM NEXT} to the {OBD II} jack of a vehicle.
4.8. Keep the button pressed. The {ICOM NEXT} starts with all {LED}s glowing red. The {LED}s stay red; some may flicker orange/yellow. Keep the button pressed.
4.9. Keep the button pressed. After about 4 seconds, all {LED}s turn orange/yellow. All {LED}s now glow in the same colour.
4.10. Release the button and then press it three times within five seconds. The {LED}s glow or flash red and orange/yellow again.
4.11. Wait: This procedure may take several minutes. Do not disconnect the {ICOM NEXT} as long as any {LED} glows red.
4.12. After about 5 minutes the SYSTEM {LED} turns green again. The {ICOM NEXT} has been updated and is ready for use.
IMPORTANT: When the software update is complete, the {ICOM NEXT} needs to be connected to the dealer’s network in order to be reconfigured.
All previous settings are lost during the update. If there is a “{user.settings}” file on the {USB} flash drive, it will be applied after the firmware update.
4.13 Free download icom next firmware:
ICOM NEXT firmware 3.14.10:
https://mega.nz/#!uZ0XgTbB!0pW25mgpiUuhB2K5gBIxw9O-Yj65aQ1Jh50RdKAD4Is
ICOM NEXT firmware 3.14.08:
https://mega.nz/#!D0cwTTzb!LCeRki-jObvuV9m6UaRsxiGCuHlwv-u33ShJO4ZGXaQ
ICOM Image 03.14.08 (Application image+ Firmware image+ ICOM NEXT app .tar.gz+ ICOM NEXT rootfs. tar.gz)
https://mega.nz/#F!zZUXiYpI!H9-RKjfqd4Mjk9EoWMlxLw
Leave a Reply