Does foxFlash Support This ECU Model? Software Installation & Compatibility Guide

When using foxFlash ECU programming software, customers often ask two common questions:

1. Why can’t the software installation be completed?

2. Does foxFlash support my specific ECU model?

This article answers both questions and provides a detailed overview of foxFlash ECU support and recent protocol updates.

Issue 1: Software Installation Cannot Be Completed

Problem

Some users report that they are unable to finish the foxFlash software installation on their computer.

Solution

Our engineer can install the software remotely for you.

Remote installation ensures:

• Correct software setup

• Proper driver installation

• Avoidance of system conflicts

If you experience installation issues, please contact our support team to arrange remote assistance.

Issue 2: Does foxFlash Support This ECU Model?

Problem

Customers often ask us to verify whether foxFlash supports a specific ECU or vehicle model.

Answer

Sorry, foxFlash does not support this particular model.
Not all ECUs are compatible, as support depends on ECU hardware, processor type, and security level.

Below is an overview of supported ECUs and vehicles to help you verify compatibility.

Supported Control Units & Vehicles (Highlights)

Bosch EDC17C83 (TC1793)

Supported Vehicles:

• Isuzu D-Max 2017–2022 | 1.9D 164cv

• Isuzu D-Max Rodeo 2017–2022 | 1.9D 164cv

• Isuzu M21 2017–2022 | 1.9D 123cv

Features:

• BENCH read is real

• Read/Write time: ~6 minutes (first programming), ~30 seconds afterward

• ⚠️ Note: Some newer vehicles may have a Secure Gateway

foxFlash ECU Updates & Protocol Support

March 15, 2023 – Continental GPEC Series

foxFlash now supports:

• Continental GPEC2 / GPEC3 / GPEC4LM / GPEC2A

Supported Operations:

• Boot Read

• Boot Write

Supported Vehicles (BOOT mode):

• Chrysler 200 / 300 / Aspen / Town & Country / Grand Voyager

• Dodge Avenger / Challenger / Charger / Dart / Durango

• Fiat Tipo / Toro / 500X

• Jeep Cherokee / Compass / Gladiator / Grand Commander / Renegade / Wrangler

March 03, 2023 – Ducati ECUs

Bosch ME17.9.21

• Bench Read / Write

• Boot Read / Write

Supported Vehicles:

• Ducati 1.198 – 150hp

February 25, 2023 – Porsche PDK Gearbox

Supported Units (BOOT):

• Siemens PDK3000 / PDK4000

Supported Vehicles:

• Porsche 911.2

• Porsche 918

• Porsche Boxster 718 / 981

• Porsche Carrera 991

• Porsche Cayman

• Porsche Macan

• Porsche Panamera

Read Time: 12 min 36 sec
Write Time: 6 min 18 sec

January 2023 – Bosch, BMW, Delphi & More

Bentley, Skoda, Honda, Volvo (Bosch ECUs)

• MED17 / ME17 / MG1 / EDC16 / EDC17

• OBD / BENCH / BOOT support (model dependent)

BMW Siemens MSV90 (TC1796)

Supported Vehicles:

• BMW 5 Series F10 / F11

• BMW 7 Series F01 / F02

• BMW X3 F25

Delphi DCM6.2 Series

• DCM6.2AP / A / C / V

• OBD Read & Write

• JTAG / BOOT support

• Hyundai, Audi, Citroen, Fiat, Kia, MAN, Peugeot, VW, Toyota, SsangYong

Full Bench, Boot, BDM & JTAG Capabilities

foxFlash supports full system read/write (Micro + Flash + EEPROM) via pinout for ECUs from:

• Bosch

• Continental

• Delphi

• Denso

• Marelli

• Siemens

• TEMIC

Supported processors include:

• AURIX TC29x

• Freescale SPC57xx

• ST SPC58

• MPC55xx / 56xx

• Renesas SH7xxx

• NEC 76F00xx series

Final Notes

If you are unsure whether foxFlash supports your ECU model, feel free to contact our technical team for verification.

sales@obdii.shop

https://www.obdii.shop