I just got a new Autel BMW smart key so I will show how to generate a BMW key with Autel MaxiIM IM508 + XP400 Pro Programmer. This works for most 5 series like 2009 and up or 3 series 2013 and up. Other models carry the older key which is updated.
I programmed this key on a 2014 BMW 550i and it worked without any problems. All buttons are without problems, nothing needs to be set.
Procedure
1. Key Generation
Programmer >> Accept >> Universal key
This function only supports XP400/ XP401/ XP400 PRO/ XP401 PRO.
Connect them. Press “OK”.
Universal key generation >> USA >> BMW >> 5 Series >> 2014
BMW 5 Series 2009-2014
315.00 MHz, FSK, ID49
F series,
FCCID: YGOHUF5662, YGOHUF5766, KR55WK49663, KR55WK49863
This is what the remote look like, and the Autel IKEY is what the new one will look like. It’ll work just like the factory one.
Put the key into XP400 Pro key slot,
Press “Generate Universal Key”.
Acquiring universal key information, please wait…
The button type of the universal key is not applicable to the vehicle.
Forced generation may cause abnormal or missing button functions.
Press “Continue Generation” to continue.
XP400 Pro green light is blinking which means it’s making key right now…
Wait until 100%.
Completed.
2. Key Detection
Let’s detect key info:
Universal Key Information Detection >> Detect
Here you can check its series number, key ID, BOOT version, IMMO version and so on.
3. Button Adjustment
Go into “Adjusting button”.
If the buttons wasn’t correctly like lock/unlock, you can adjust it to move it around. So it’ll work correctly. If you change the numbers, it’ll change the buttons. When you change the buttons to whatever correct button you want, press “Confirm Writing”.
All right, now you have a working BMW key. It can be generated with Autel KM100 Key Programmer as well.
Contact Info:
Email: sales@obdii.shop
Leave a Reply